Landyot Radius Rods For Ford Excursion, Traction bar, Anti-Spring Wrap.

Description

Landyot Radius-Rods for the Ford Excursion, Excursion Traction Bars, Anti-spring wrap.
Will cure your spring-wrap problems, no more wandering.
Landyot Radius Rods will fit all 2 x 4 and 4 x 4 Excursions up to a 4-1/2" lift.
These are a Weld ON type traction bar, mounting tabs furnished with this kit must be
welded to the bottom of the rear OEM leaf spring mounts. All other parts are bolt on.
Can be used with OEM or Hellwig rear anti-sway bars and Roadmaster Helper Springs.
On 4WD Excursions you will need to cut off OEM traction bars.
This is a complete set, all parts are included with this kit. Installation time about 2 to 2-1/2
hours. If you have any doubts about your capabilities relative to installing these radius rods,
do not hesitate to employ the service of a competent mechanic/welder. Full instructions are
include with kit.
Please ask any questions you may have.
This kit ships partially assembled.
Warranty dose not include the powder coat finish or zinc plating.
Landyot Radius Rods cannot be installed on 2WD Excursions with airbags.
Or any Excursion fitted with AMP Research Retractable Running Boards.
On 4WD models with the Firestone " Ride-Rite" air-bags will require minor
modifications to Air Bag mounts before installation can be made.